Emptying it of clear water with floats

The floats inserted in the pump well system give the signal to the Elentek control panel: when the water in the well reaches the preset level, the selected Elentek control panel will activate the pump and the well will be emptied.

Emptying with bell sensor

If the air bell sensor is installed in the emptying system, Elentek allows you to set the thresholds: with an accuracy to the centimeter, the Elentek control panel activates and deactivates the pumps. 

Ideal for small wells, where floats could create problems, in the Elentek range is covered not only the control panel, but also the bell sensor.

Emptying with the 4-20ma+ electronic level sensor

For emptying systems that provide the electronic level sensor (piezometric), Elentek gives the possibility to set the thresholds, accurate to the centimeter, to activate and deactivate the pumps. The choice allows to replace the classic floats, which can create malfunctions in small well.

First flush rainwater Emptyng

Elentek’s Pluvio series control panels are the ideal partners to manage first flush rainwater systems and meet current regulations. Improving stormwater management, reducing the risk of flooding and the load of pollutants in water resources can now be done safely and efficiently.