Vartek
START-UP WITH INVERTER
The frequency converters are equipped with several customized functions for the control of single and multipump systems. These pump-specific functions help reduce the operational and maintenance costs of the entire pumping system lifecycle.
Frequency converters achieve these results by:
• Reduction of starting stress for the pumping system
• Optimal speed according to the demand of the moment
• Optimisation of energy consumption in parallel pump systems (boosters)
• Preventing cavitation and dry operation of pumps
• Pump motor monitoring and protection
From 1856 €
EASY INSTALLATION
CUSTOMISATION
VERSATILITY
FUNCTIONS
- Low voltage inputs and control circuits;
- Normally open input for start command with selector switch in manual position;
- 4-20mA analogue input (0-10V on request);
- Frequency inverter with:
- multifunctional LCD display
- internal ventilation
- pid adjustment
- connection via RS232/485 converter
- EMC filter 2nd environment
- maximum motor distance 50 metres
- Auxiliary and motor protection with fuses
- Main switch disconnector with door lock;
- Forced ventilation kit;
- Metal box, IP54;
- Ambient temperature: -5/+40 °C;
- Relative humidity 50% at 40 °C (non-condensing).
VERSIONS
VARTEK 1
VARTEK 2
VARTEK 3
POWER SUPPLY
Power supply 3~50/60Hz 400V±10% - output 3~400V;
CARACTÉRISTIQUES PRINCIPALES
Vartek
VARTEK 1
• Normally open contact for minimum level/ pressure contact;
• Selector for Auto-Off-Manual operation (MANUAL stable)
- Manual: costant operation at 50Hz with input from pressure switch;
- Automatic: operation in modulation with analog sensor
VARTEK 2
• 2 normally open contacts for minimum level/ pressure contact;
• 2 selectors for Auto-Off-Manual operation (MANUAL stable)
- Manual: constant operation at 50Hz with input from pressure switch;
- Automatic: operation in modulation with analog sensor
• 2nd motor with DOL start up to 7.5 KW, star/ delta over 7.5 KW;
• 2nd motor contactors in AC3;
• Thermal relay of the 2nd pump internally restorable.
VARTEK 3
• 3 normally open contacts for minimum level/ pressure contact;
• 3 selectors for Auto-Off-Manual operation (MANUAL stable)
- Manual: constant operation at 50Hz with input from pressure switch;
- Automatic: operation in modulation with analog sensor
• 2nd-3rd motor with DOL start up to 7.5 KW, star/delta over 7.5 KW;
• 2nd-3rd motor contactors in AC3;
• Thermal relay of the 2nd -3rd pump internally restorable.
Vartek
PRINCIPALES CARACTÉRISTIQUES
Inverter start-up
A frequency converter is an electronic device used to control the rotational speed and torque of an electric motor. The motor, in turn, drives a load (e.g. a pump). A frequency converter converts the mains AC voltage into DC voltage via a rectifier and is stabilised by the DC link capacitor bank. The inverter finally converts the DC voltage back into AC with variable frequency. Frequency inverters for primary water and waste water treatment applications are equipped with various customised functions for controlling single and multi-pump systems.
Components and applications
VARTEK control panel have a multifunctional display, a manual or automatic selector switch, and a switch-disconnector with door lock system.
A terminal block allows connection to external consumers and controls such as pressure switches, float switches, etc.
VARTEK control panels are optimal in various applications with:
Industrial water pumps, booster pumps
Rainwater lifting pumps, irrigation pumps (submersible or surface)
Submersible pumps, waste water pumps
À NE PAS MANQUER
CON-O...V
COD:
98014*
Hour meter
K3SL
COD:
98007
Kit of 3 level probes (electrodes)
DA-B PRESS
COD:
98063
Stop device for low pressure
RL-…
COD:
98006*
Level relay for automation
MODÈLES
Vartek 1
SCHÉMAS DE RACCORDEMENT
Vartek 2
SCHÉMAS DE RACCORDEMENT
Vartek 3
SCHÉMAS DE RACCORDEMENT
SCHÉMAS DE RACCORDEMENT
ACCESSOIRES
Code
Modèle
Description
EXTENSIONS
Code
Modèle
Description
PRODUITS CONNEXES
Code
Modèle
Description
_edited.jpg)
_edited.jpg)