top of page

PON - PIA 8.30-12.30 e 13.30-17.30

sfondo prodotto con onda.png
image-from-rawpixel-id-2354220-original_edited_edited.png
Tekspeed set - Frequency inverter and direct start with fixed speed

Tekspeed SET

Frequency inverter and direct start with fixed speed, for the control of two three-phase pumps, with wall mounting

Tekspeed SET is an electrical control and protection  panel for two pumps. It includes an inverter  (frequency variator) for the control of the main pump  and a direct start at fixed speed for the secondary  pump. This system is designed to maintain the  optimal pressure in the system. 


The two pumps work in alternation and  contemporaneity and the pump managed by the  inverter changes with each start, or timed.

From 1330 €

FUNCTIONS

  • Frequency inverter with PID logic for the management of the main pump 

  • Power relay for the management of the auxiliary electric pump 

  • Multifunction LCD display for visualization: nominal pressure, voltage, current, frequency, working hours, number of starts and  alarm history log 

  • Buttons for custom function selection and parameterization 

  • Alternating sequence of operation: for cycles or for maximum time 

  • ART function (Automatic Reset Test). When the control panel is in dry run protection, ART tries, with a programmed periodicity, to  restart the pump until the water flow is re-established 

  • STC function (Smart Temperature Control): when the temperature of the electronic board exceeds 85º C automatically decreases  the frequency of revolution of the pump, decreasing the heat generation, while maintaining the flow of water 

  • Automatic system recovery after power failure. The system restarts maintaining the configuration parameters 

  • Configurable electronic input for: external level control, assigning a second pressure setpoint, control remote start-stop 

  • Input for external pressure transducer with 4-20 mA signal 

  • Aluminium heat sink with forced ventilation

Multifunctional LCD control panel

  • Indication LEDs, START-STOP, AUTOMATIC buttons 

  • Configuration system

Tekspeed SET

PROTECTION

  • Control and protection system of electric pumps against overcurrent. 

  • Dry running protection system of the electric pump. 

  • Abnormal supply voltage. 

  • Short circuit between system output phases 

  • Pressure transducer error alarm

GŁÓWNE CECHY

Tekspeed SET

Tekspeed SET

Tekspeed set - Frequency inverter and direct start with fixed speed

ŁĄCZNOŚĆ

APLIKACJE

Image by Adi Goldstein
Wybierz opcję

PRIVACY

Oświadczam, że mam ukończone szesnaście lat, a jeśli mam mniej niż szesnaście lat, że zostałem upoważniony przez osobę sprawującą władzę rodzicielską, w związku z czym wyrażam zgodę na przetwarzanie moich danych osobowych zgodnie z Polityką prywatności..

KOMUNIKACJA

Wyrażam zgodę na przetwarzanie moich danych osobowych. W celu przesyłania newslettera, komunikacji telefonicznej (sms, WhatsApp, połączenie głosowe). Informacyjny formularz kontaktowy i prośba o informacje.

Chcesz uzyskać więcej informacji? 
  Skontaktuj się z nami, aby uzyskać wycenę i odkryj obniżoną cenę zarezerwowaną dla Ciebie!  

KLUCZOWE CECHY

CZEGO NIE MOŻNA PRZEGAPIĆ

MODELE

Carica altri modelli

Prześlij inne modele

SCHEMATY POŁĄCZEŃ

Prześlij inne modele

SCHEMATY POŁĄCZEŃ

Prześlij inne modele

SCHEMATY POŁĄCZEŃ

Carica altri modelli

SCHEMATY POŁĄCZEŃ

WSZYSTKIE AKCESORIA

Kod

Model

Opis

ROZSZERZENIA

Kod

Model

Opis

PRODUKTY POWIĄZANE

Kod

Model

Opis

applicazioni tipiche

TYPOWE APLIKACJE

abstract-geometry-glass-dark-4k_edited.jpg

Jesteś sprzedawcą czy instalatorem?

Mówią o nas:

średnia ocena to 5 na 5

Higly recommended

Easy is an advanced but cheap control panel

Jason C.

15/6/22

średnia ocena to 4 na 5

I am satisfied with the panel EXPRESS PRO

I had to read the instructions manual carefully as it has many functions for different applications

Ryan F.

6/10/23

średnia ocena to 5 na 5

Il quadro che cercavo

Easy è il quadro economico e semplice che cercavo. Consigliatissimo

Thomas A.

27/9/22

ADRES

Siedziba główna:

Via A. Meucci, 5-11, 35028

Piove di Sacco (PD) - Italia

Siedziba operacyjna

Via Chiusa, 1

Sant'Angelo di Piove 35020

(PD) - Italia

GODZINY OTWARCIA

PONIEDZIAŁEK

08:30-12:30 / 13:30-17:30

WTOREK

08:30-12:30 / 13:30-17:30

ŚRODA

08:30-12:30 / 13:30-17:30

CZWARTEK

08:30-12:30 / 13:30-17:30

PIĄTEK

08:30-12:30 / 13:30-17:30

Kontakty

Privacy Policy

Cookies Policy

Copyright 2023 © Elentek srl

P. Iva 04534630282

Cap. Soc. i.v. 100.000 €

Chcesz więcej informacji?

Skontaktuj się z nami, a odpowiemy najszybciej, jak to możliwe!

PRIVACY

Deklaruję, że ukończyłem szesnaście lat, a jeśli mam mniej niż szesnaście lat, otrzymałem zgodę od osoby odpowiedzialnej za rodzicielstwo, dlatego wyrażam zgodę na przetwarzanie moich danych osobowych zgodnie z Polityką Prywatności

KOMUNIKATY

Zgadzam się na przetwarzanie moich danych osobowych w celu przesyłania newslettera, komunikacji telefonicznej (sms, WhatsApp, połączenie głosowe) oraz w celu udzielenia informacji za pośrednictwem formularza kontaktowego

bottom of page