wastek PRO
A control panel for a small well?
Wastek Pro is designed to fit into small spaces. The peculiarity of this control panel is the possibility to use an air pressure sensor, particularly useful when the installation site is a small well.
Wastek Pro allows an accurate level detection from 0 to 100 cm and is expandable with a range of connectivity modules.
From 469 €
EASY INSTALLATION
USER INTERFACE
EXPANDABILITY
VERSATILITY
FUNCTIONS
LCD display for displaying and programming: voltage, current, power factor, hours of operation, number of starts, motor status, alarms, sensor signal and thresholds
AUTOMATIC - 0 (standby) – MANUAL pushbuttons (fixed or pulse)
Language settings (Italian, English, French, Spanish, German)
Dry running protection by: level probes/floats/pressure switches and minimum current
Up to 4 control inputs: floats/pressure switches
Input for air sensor and 4-20 mA or 0-10V analogue signal
Unit of measurement of analog signal: centimetres or metres
Clicson inputs with automatic reset (can be disabled)
Inputs inversion (from normally open to normally closed)
Automatic reset from minimum current alarm settable with 4 programmable times
Start-up and shutdown delay time (programmable)
Maintenance time control (programmable
Pushbutton for manual operation (fixed or pulse)
Provision for run capacitors on single-phase model (not included)
ADDITIONAL FUNCTIONS WASTEK PRO 2
Duty/standby (can be disabled)
Immediate motor changeover in case of a fault
VERSIONS
Power supply 1phase 100-240Vac 50/60Hz
Power supply 3phase 310-450Vac 50/60Hz
CONTROLS
Electronic control of minimum and maximum voltage
Electronic control of maximum motor current
Electronic minimum motor current control
Failure or incorrect phase sequence control on power supply input (can be disabled)
ALARMS
Alarms reported: voltage status, levels, motor overload, minimum current, clicson motor
System maintenance warning
Alarm output contacts
PROTECTIONS
Auxiliary and motor protection fuses
Isolator (except for NB code)
Box in ABS, IP55
GŁÓWNE CECHY
wastek PRO
wastek PRO
RS485
(Optional)
UNIQUE APP
AIR PRESSURE SENSOR
KLUCZOWE CECHY
CZEGO NIE MOŻNA PRZEGAPIĆ
APP
COD:
98107
The app allows you to control and manage the operation of the switchboard directly from your smartphone, adding features such as an operating counter, start-up counter, ammeter, history of the last 20 alarms, input and output status, and the ability to manage dip-switches and trimmers from your smartphone, increasing calibration accuracy.
MODELE
Wastek PRO 1
SCHEMATY POŁĄCZEŃ
Wastek PRO 2
SCHEMATY POŁĄCZEŃ
SCHEMATY POŁĄCZEŃ
SCHEMATY POŁĄCZEŃ
WSZYSTKIE AKCESORIA
Kod
Model
Opis
ROZSZERZENIA
Kod
Model
Opis
PRODUKTY POWIĄZANE
Kod
Model
Opis
_edited.jpg)