top of page

LUN - VEN 8.30-12.30 e 13.30-17.30

sfondo prodotto con onda.png
image-from-rawpixel-id-2354220-original_edited_edited.png
Tekspeed set - Frequency inverter and direct start with fixed speed

Tekspeed SET

Frequency inverter and direct start with fixed speed, for the control of two three-phase pumps, with wall mounting

Tekspeed SET is an electrical control and protection  panel for two pumps. It includes an inverter  (frequency variator) for the control of the main pump  and a direct start at fixed speed for the secondary  pump. This system is designed to maintain the  optimal pressure in the system. 


The two pumps work in alternation and  contemporaneity and the pump managed by the  inverter changes with each start, or timed.

From 1330 €

FUNCTIONS

  • Frequency inverter with PID logic for the management of the main pump 

  • Power relay for the management of the auxiliary electric pump 

  • Multifunction LCD display for visualization: nominal pressure, voltage, current, frequency, working hours, number of starts and  alarm history log 

  • Buttons for custom function selection and parameterization 

  • Alternating sequence of operation: for cycles or for maximum time 

  • ART function (Automatic Reset Test). When the control panel is in dry run protection, ART tries, with a programmed periodicity, to  restart the pump until the water flow is re-established 

  • STC function (Smart Temperature Control): when the temperature of the electronic board exceeds 85º C automatically decreases  the frequency of revolution of the pump, decreasing the heat generation, while maintaining the flow of water 

  • Automatic system recovery after power failure. The system restarts maintaining the configuration parameters 

  • Configurable electronic input for: external level control, assigning a second pressure setpoint, control remote start-stop 

  • Input for external pressure transducer with 4-20 mA signal 

  • Aluminium heat sink with forced ventilation

Multifunctional LCD control panel

  • Indication LEDs, START-STOP, AUTOMATIC buttons 

  • Configuration system

Tekspeed SET

PROTECTION

  • Control and protection system of electric pumps against overcurrent. 

  • Dry running protection system of the electric pump. 

  • Abnormal supply voltage. 

  • Short circuit between system output phases 

  • Pressure transducer error alarm

CARATTERISTICHE PRINCIPALI

Tekspeed SET

Tekspeed SET

Tekspeed set - Frequency inverter and direct start with fixed speed

CONNETTIVITÀ

APPLICAZIONI

Image by Adi Goldstein
Seleziona un'opzione

PRIVACY

Dichiaro di avere compiuto sedici anni, e se minore di sedici, di essere stato autorizzato dal titolare della responsabilità genitoriale, pertanto acconsento al trattamento dei miei dati personali così come indicato nella Privacy Policy.

COMUNICAZIONI

Acconsento al trattamento dei miei dati personali. Per l’inoltro della newsletter, le comunicazioni via telefono (sms, WhatsApp, telefonata vocale). Informativa modulo contatti e richiesta informazioni.

Vuoi maggiori informazioni? 
  Contattaci per un preventivo e scopri il  prezzo scontato a te riservato!  

CARATTERISTICHE CHIAVE

COSA NON PUÓ MANCARE

MODELLI 

Carica altri modelli

Carica altri modelli

SCHEMI DI COLLEGAMENTO

Carica altri modelli

SCHEMI DI COLLEGAMENTO

Carica altri modelli

SCHEMI DI COLLEGAMENTO

Carica altri modelli

SCHEMI DI COLLEGAMENTO

TUTTI GLI ACCESSORI

Codice

Modello

Descrizione

ESPANSIONI

Codice

Modello

Descrizione

PRODOTTI CORRELATI

Codice

Modello

Descrizione

applicazioni tipiche

APPLICAZIONI TIPICHE

abstract-geometry-glass-dark-4k_edited.jpg

Sei un rivenditore o un installatore?

Dicono di noi:

la valutazione media è 5 su 5

Higly recommended

Easy is an advanced but cheap control panel

Jason C.

15/6/22

la valutazione media è 4 su 5

I am satisfied with the panel EXPRESS PRO

I had to read the instructions manual carefully as it has many functions for different applications

Ryan F.

6/10/23

la valutazione media è 5 su 5

Il quadro che cercavo

Easy è il quadro economico e semplice che cercavo. Consigliatissimo

Thomas A.

27/9/22

INDIRIZZO

Via Chiusa, 1

Sant'Angelo di Piove 35020

(PD) - Italia

ORARI

Lunedì

08:30-12:30 / 13:30-17:30

Martedì       

08:30-12:30 / 13:30-17:30

Mercoledì   

08:30-12:30 / 13:30-17:30

Giovedì       

08:30-12:30 / 13:30-17:30

Venerdì       

08:30-12:30 / 13:30-17:30

CONTATTI

Privacy Policy

Cookies Policy

Copyright 2023 © Elentek srl

P. Iva 04534630282

Cap. Soc. i.v. 100.000 €

Vuoi più info?

Contattaci e ti risponderemo nel minor tempo possibile!

PRIVACY

Dichiaro di avere compiuto sedici anni, e se minore di sedici, di essere stato autorizzato dal titolare della responsabilità genitoriale, pertanto acconsento al trattamento dei miei dati personali così come indicato nella Privacy Policy.

COMUNICAZIONI

Acconsento al trattamento dei miei dati personali. Per l’inoltro della newsletter, le comunicazioni via telefono (sms, WhatsApp, telefonata vocale). Informativa modulo contatti e richiesta informazioni.

bottom of page